Tumble Dryers BUSH TDNBX8HP 917 5187 Heat Pump
Help & Support for your Tumble Dryers BUSH TDNBX8HP 917 5187 Heat Pump
- Preparing the clothing for the tumble dryer
Delicate, embroidered, woollen/silk, expensive clothing are not suitable for drying in the tumble dryer.…
- Programme Selection Knob
My Cycle – Used to save your favourite programme.…
- Additional function buttons
Delay – Used to delay the start time of the drying cycle.…
- Selecting a drying cycle
Caution: Never open the door while a drying cycle is running. If you do, do not keep it open for a long period of time. Press Start/Pause to resume the drying cycle.…
- Electronic indicator symbols / indicators
Delay timer indicator – illuminates when the delay timer has been activated.…
- Delay start timer
Use this function to set a delay timer and can be set for up to 24 hours. The selected drying cycle will commence when the delay timer had ended.…
- Change the drying cycle after a programme has started
Press the on/off button to turn the tumble dryer off.…
- Cancel the programme after the drying cycle has started
Open the door .…
- Turning the buzzer on and off
The tumble dryer will beep if an additional button is pressed, or if the programme selection knob is turned during the drying cycle The tumble dryer will beep at the end of the drying cycle. Th…
- Turning the child lock on and off
To avoid programme flow from being affected if the additional function buttons are pressed or programme selection knob is turned when performing a drying cycle in your machine, a child lock is availa…
- Add or remove clothing
Open the door .…
- Power saving mode
When the tumble dryer has been in stand-by mode for 3 minutes, it will go into power saving mode and display – on the control panel .…
- Using the My Cycle Programme
The My Cycle programme can used to define and save your most used drying programme.…
- Setting the intensity function
Use the intensity function to adjust the drying time of the clothing. There are 4 settings to choose from which increase in 3 minutes increments. Note: This function must be selected before the dr…
- Setting the anti-crease function
At the end of the drying cycle “ End” will be displayed for 1 minute, then an anti-crease cycle will run for 30 minutes. You can select the anti-crease function, this will run for 120 minutes. N…