Tumble Dryers BUSH TDTE Heat Pump Tumble Dryer
Help & Support for your Tumble Dryers BUSH TDTE Heat Pump Tumble Dryer
- The water tank warning indicator is on/flashing
Never remove the water tank when the tumble dryer is in use…
- E03 — Aquaswitch / pump error
The Aquaswitch / pump error code indicates that there could be is a fault in the system responsible for collecting water.…
- E04 — Compressor malfunction
The Compressor malfunction error code indicates that there is a fault within the compressor.…
- Carry out a power reset
Turn the programme selection knob to Off…
- There is a burning smell coming from the tumble dryer
Clothing can get caught between the door seal and drum which can create a burning rubber smell and even smoke when the tumble dryer starts. Ensure the clothing is placed properly inside the drum…
- Installing the tumble dryer under a worktop
If you are installing the tumble dryer under a worktop ensure there is proper ventilation and 30mm space between the side and rear of the tumble dryer.…
- The drum does not rotate, but the motor runs
Unplug the tumble dryer from the mains.…
- The clothing is being damaged or torn
Clothing can get caught between the door seal and drum which will create friction when the tumble dryer starts. Ensure the clothing is placed properly inside the drum .…
- Water is leaking from the door
Check that the seals of the door are clean and free from lint.…
- Positioning the tumble dryer
Install the tumble dryer in a dry, dust free, well ventilated room.…