Tumble Dryers BUSH TDT Heat Pump Tumble Dryer
Help & Support for your Tumble Dryers BUSH TDT Heat Pump Tumble Dryer
- Additional function buttons
Delay Start – Used to delay the start time of the drying cycle.…
- Before use
Please read these instructions carefully. They contain important information which will help you get the best from your tumble dryer and ensure safe and correct installation and operation.…
- Carry out a power reset
Turn the programme selection knob to Off…
- Cleaning the heat exchanger
Always make sure that you unplug the tumble dryer from the mains before you start any maintenance. Warning: Do not use Abrasive cleaners, sharp instruments, soap, household cleaner, detergent or…
- Delay start timer
You can delay the start time a drying cycle by 3 options, 3 hours, 6 hours or 9 hours. The selected drying cycle will commence when the delay timer had ended.…
- Drying cycle is taking too long
Check that the lint filter is not obstructed.…
- E00 — User Interface error
The User Interface error code indicates that there is a fault with the control panel, buttons or display.…
- E03 — Aquaswitch / pump error
The Aquaswitch / pump error code indicates that there could be is a fault in the system responsible for collecting water.…
- E04 — Compressor malfunction
The Compressor malfunction error code indicates that there is a fault within the compressor.…
- E05 — Compressor NTC error
The Compressor NTC error code indicates that there is a fault with the compressor's temperature sensor.…