Washing Machines BUSH WMNSINT714W — 736/0839
Help & Support for your Washing Machines BUSH WMNSINT714W — 736/0839
- The washing machine is vibrating
Ensure the washing machine is level and positioned on a firm level base. If necessary adjust the feet .…
- Laundry care symbols
Clothes will usually include ‘laundry care’ symbols on the label which can help you select the correct washing cycle. The steps below will give you some general guidance and help you see what most of…
- Positioning the washing machine
The connection and recess dimensions are included in the separate installation instructions in the user manual.…
- The washing machine does not operate
Check that the washing machine is plugged into the mains power supply and the plug is switched on.…
- The washing machine does not receive water
Ensure that the water tap is in the open position.…
- Water is draining as soon as the washing machine fills
Check that the end of the drain hose is not positioned too low. The drain hose needs to be at a height between 60-100cm from the floor.…
- Cleaning the water inlet filter
On the tap part of your machine’s water inlet hose and at the ends of water inlet valves, there are filters to prevent entrance of the dirt and foreign materials in the water to the machine. If the m…
- Electrical safety
Please read these instructions carefully. They contain important information which will help you get the best from your washing machine and ensure safe and correct installation and operation.…
- Excessive foam in the detergent drawer
Ensure the washing machine is level and positioned on a firm level base. If necessary adjust the feet .…
- The washing machine is not draining water
Check that the drain hose is not obstructed or bent.…