To see what each step looks like, just click each step and check out the picture. You can also use the arrow keys on your keyboard.

  • Important: Only tighten the hose connection nuts by hand – do not overtighten.

  • 1.

    Locate the water inlet connection on the rear of the dishwasher.

  • 2.

    Connect the right angled end of the hose to the inlet connection and tighten the nut turning it clockwise by hand.

    Caution: Only tighten the nut by hand, never use tools when tightening the nut as you may damage it.

  • 3.

    Connect the straight end of the water inlet hose to the cold mains water supply valve by turning clockwise. Usually the cold water supply is a blue tap.

    Caution: Only tighten the nut by hand, never use tools when tightening the nut as you may damage it.

  • 4. When both ends of the water inlet hose are connected, open the water inlet tap and check for any water leaks.