To see what each step looks like, just click each step and check out the picture. You can also use the arrow keys on your keyboard.

  • 1.

    Ensure the dishwasher is switched off before starting. Hold down the Programme button and then press the Power button.

  • 2.

    Keep holding the Programme button until SL is displayed on the screen. Release the Programme button.

  • 3.

    Repeatedly press the press the Programme button, to set the desired water softener level.

  • 4. Press the Start/ Pause button to confirm your selection. Your dosage will remain at this setting until changed again.
    If the dishes are not drying properly or are spotted, increase the dosage level. If blue stains form on your dishes, decrease the dosage level. The factory default is 3. The lowest dosage level is 1, the highest is 6.