To see what each step looks like, just click each step and check out the picture. You can also use the arrow keys on your keyboard.

  • 1.

    Drawer Cover – The drawer cover allows access to the water tank.

  • 2. Programme Selection Knob – Used for selecting the desired drying cycle.

    For more information, see the Programme selection knob topic.

  • 3.

    Electronic Indicator and Additional functions – Contains the function buttons and display symbols.

    For more information, see the Additional function buttons and Electronic indicator symbols / indicators topics.

  • 4. Water Tank - Used to collect the moisture from the wet clothing.
  • 5.

    Door – Used to load clothing into the tumble dryer.

  • 6.

    Interior Light – Turns on automatically when the door is opened and turns off automatically.

    Caution: Never try to modify or replace the Interior Light bulb.

  • 7.

    Humidity Sensor – Used to detect whether the clothing is dry or not.

  • 8.

    Drum – Used to hold and rotate the clothing during the drying cycle.

  • 9.

    Lint Filter – Used to prevent fibres which are released from clothing in the tumble dryer blocking the vent hose. The lint filter must be cleaned after each use.

    For more information, see the Cleaning the lint filter topic.

  • 10.

    Type Plate – Contains the model and serial number of the tumble dryer.

  • 11.

    Plinth – The plinth is a cover which allows you to access the condenser.

    For more information, see the Cleaning the condenser topic.
  • 12. Condenser Filter — Used to prevent fibres which are released from clothing in the tumble dryer blocking the condenser.
  • 13. Ventilation Grills – Used to allow air to circulate so the tumble dryer does not overheat
  • 14.

    Adjustable Feet – Used to level the tumble dryer on a slightly uneven surface.

    For more information, see the Adjusting the feet topic.
  • 15.

    Power Lead – Used to connect the tumble dryer to the mains power.