To see what each step looks like, just click each step and check out the picture. You can also use the arrow keys on your keyboard.

  • 1. Unplug the tumble dryer from the mains power.
  • 2. Carefully pull the tumble dryer out of the installed position.
  • 3. Locate the drain hose connection point on the rear of the tumble dryer.
  • 4. Using your hand, carefully pull out the water hose.
  • 5. Push one end of the drain hose into the drain hose connection point.
  • 6. Connect the other end of the drain hose to a waste pipe or stand pipe.
    Ensure the maximum height of the waste pipe or stand pipe is no higher than 80cm.
  • 7. Ensure the drain hose is not kinked or tangled.
  • 8. Push the tumble dryer back into position.
  • 9. After the next drying cycle, check for any leaks.