To see what each step looks like, just click each step and check out the picture. You can also use the arrow keys on your keyboard.

  • 1. Press Standby to turn your TV off.
  • 2. Locate the ANT socket on the side of your TV.
  • 3. Connect the device to the ANT socket.
  • 4. Press Standby to turn on your TV.
  • 5. Press Settings.
  • 6. Scroll to Installation, then press OK.
  • 7. Scroll to Manual Channel Scan, then press OK.
  • 8. Scroll to Search Type.
  • 9. Using Left or Right select Analogue.
  • 10. Scroll to TV System.
  • 11. Using Left or Right select I.
  • 12. Scroll to Channel.
  • 13. Using Left or Right select 68.
  • 14. Press OK to start the channel scan.