To see what each step looks like, just click each step and check out the picture. You can also use the arrow keys on your keyboard.

  • 1. Press Standby to turn your TV off.
  • 2. Locate the ANT socket on the side of your TV.
  • 3. Connect the device to the ANT socket.
  • 4. Press Standby to turn on your TV.
  • 5.

    Press Home.

  • 6.

    Scroll to Settings.

  • 7.

    Scroll to Installation, then press OK.

  • 8.

    Scroll to Manual Channel Scan, then press OK.

  • 9.

    Scroll to the Search Type.

  • 10.

    Using Left or Right select Analogue.

  • 11.

    Scroll to TV System.

  • 12.

    Using Left or Right select I.

  • 13.

    Scroll to Channel.

  • 14. Using Left or Right select 68.
  • 15. Press OK to start the channel scan.