Operating your cordless vacuum cleaner
To see what each step looks like, just click each step and check out the picture. You can also use the arrow keys on your keyboard.
- To prevent a loss of suction, ensure any removable accessories/filters are assembled and aligned correctly.
- 1.
Remove the vacuum clean from the wall bracket.
- 2.
If required, push the extension tube onto the handheld unit until you hear a click.
- 3.
Push the desired accessory onto the extension tube until you hear a click.
For more information, see the Getting to know the accessories topic.
- 4.
Push the power button to turn on the cordless vacuum cleaner.
- 5.
The cordless vacuum cleaner starts in auto mode. Push the speed control button to switch between auto, high, middle and low power mode.
For more information, see the Power modes topic. - 6.
Push the power button to turn off the cordless vacuum cleaner.
- 7.
Push the release button, then pull the attached accessory away from the extension tube.
- 8.
Push the release button, then pull the extension tube away from the handheld unit.
- 9.
Empty the dust container.
For more information, see the Emptying the dust container topic.
- 10.
Mount the cordless vacuum cleaner onto the wall bracket.