Clean the floor head brush roll
To see what each step looks like, just click each step and check out the picture. You can also use the arrow keys on your keyboard.
Always disconnect the vacuum cleaner from the mains before carrying out any cleaning or maintenance.
To prevent a loss of suction, ensure any removable accessories/filters are assembled and aligned correctly.
- 1.
Press the release button, then pull the floor head away from the extension tube.
- 2.
Lay the floor head upside down. Locate and unlock, then remove the brush roll lock.
- 3.
Pull the brush roll away from the floor head.
- 4.
Remove any trapped hair or debris. This can be done by carefully using a pair of scissors to cut through hair. Ensure you do not cut the floor head roller bristles.
- 5.
Clean the floor head brush roll under running water, then allow the floor head to thoroughly dry.
- 6.
Replace the brush roll.
- 7.
Replace the brush roll lock.