Operating your cordless vacuum cleaner
To see what each step looks like, just click each step and check out the picture. You can also use the arrow keys on your keyboard.
- To prevent a loss of suction, ensure any removable accessories/filters are assembled and aligned correctly.
- 1.
Remove the vacuum clean from the wall bracket.
- 2.
If required, push the extension tube onto the handheld unit until you hear a click.
- 3.
Push the desired accessory onto the extension tube until you hear a click.
For more information, see the Getting to know the accessories topic.
- 4.
Push the power button to turn on the vacuum cleaner.
- 5.
The vacuum cleaner starts in high mode. Push the high/low mode button to switch between high and low power mode.
The low power mode is suitable for hard floors, where the high power mode is suitable for carpets and areas which require more suction. - 6.
Push the power button again to turn off the vacuum cleaner.
- 7.
Push the release button, then pull the attached accessory away from the extension tube.
- 8.
Push the release button, then pull the extension tube away from the handheld unit.
- 9.
Empty the dust container.
For more information, see the Emptying the dust container topic.
- 10.
Mount the vacuum cleaner onto the wall bracket.