To see what each step looks like, just click each step and check out the picture. You can also use the arrow keys on your keyboard.

  • Always disconnect the vacuum cleaner from the mains before carrying out any cleaning or maintenance.

    To prevent a loss of suction, ensure any removable accessories/filters are assembled and aligned correctly.

  • 1.

    Press the release button, then pull the floor head away from the extension tube.

  • 2.

    Lay the floor head upside down.

  • 3.

    Locate and unlock, then remove the brush roll lock.

  • 4.

    Pull the brush roll away from the floor head.

  • 5.

    Remove any trapped hair or debris. This can be done by carefully using a pair of scissors to cut through hair. Ensure you do not cut the floor head roller bristles.

  • 6.

    Clean the floor head brush roll under running water, then allow the floor head to thoroughly dry.

  • 7.

    Replace the brush roll.

  • 8.

    Replace the brush roll lock.