To see what each step looks like, just click each step and check out the picture. You can also use the arrow keys on your keyboard.

  • Always disconnect the vacuum cleaner from the mains before carrying out any cleaning or maintenance.

    To prevent a loss of suction, ensure any removable accessories/filters are assembled and aligned correctly.

  • 1.

    If the vacuum cleaner is very hot to the touch, it maybe overheating. Do not use the vacuum cleaner until it has cooled down.

    The vacuum cleaner has a thermal cut off thermostat that protects the vacuum cleaner in case of the motor overheating.

  • 2.

    Ensure the power lead is securely plugged into the mains socket.

  • 3.

    Check that the dust container is not full and is properly attached to the vacuum cleaner.

    For more information, see the Clean the dust container topic.

  • 4.

    Check that the dust container filter is not blocked or needs cleaning.

    For more information, see the Clean the dust container filter topic.

  • 5.

    Check that the brush roll bar is not blocked or needs cleaning.

    For more information, see the clean the brush roll bar topic.

  • 6.

    Check that the main hose is not blocked.

    For more information, see the Checking for blockages topic.