Dishwashers BUSH BFSNB12B 798/7645

Connecting the water inlet hose

Important: Only tighten the hose connection nuts by hand – do not overtighten.

1.

Locate the water inlet connection on the rear of the dishwasher.

2.

Connect the right angled end of the hose to the inlet connection and tighten the nut turning it clockwise by hand.

Caution: Only tighten the nut by hand, never use tools when tightening the nut as you may damage it.

3.

Connect the straight end of the water inlet hose to the cold mains water supply valve by turning clockwise. Usually the cold water supply is a blue tap.

Caution: Only tighten the nut by hand, never use tools when tightening the nut as you may damage it.

4. When both ends of the water inlet hose are connected, open the water inlet tap and check for any water leaks.