P1/P2/Half Load/3h/6h LEDs – Insufficient water
1. If your dishwasher has the P1, P2, Half Load, 3 hour and 6 hour LEDs illuminated, this refers to an Insufficient Water error. Follow the steps below to try and fix the issue.
2.
Ensure the water inlet tap is in the open position.
3.
Check that the water inlet hose is clean and not blocked or kinked.
4. Check that the water inlet filter is clean and not blocked.
For more information, see the Cleaning the water inlet filter topic.
5. If the problem persists, press the On/Off button to turn the dishwasher off.
6.
Unplug the dishwasher from the mains.
If the product is within warranty, contact your retailer. If the product is outside of the warranty period, either contact Argos technical support or a qualified repair service.