Cleaning the lint filter
CAUTION: The lint filter MUST in place and be cleaned after each use.
1.
Unplug the tumble dryer from the mains power.
2.
Open the door.
3.
Locate the lint filter.
4.
Remove the lint filter by inserting your fingers into the 4 holes around the exhaust vent shroud, then pull outwards.
5.
Remove the exhaust filter from the exhaust vent shroud.
Using a brush or vacuum cleaner, remove the lint from the exhaust filter.
6.
Remove the lint filter from the exhaust vent shroud.
Using a brush or vacuum cleaner, remove the lint from the lint filter being careful not to damage the filter.
7.
Replace the lint filter and exhaust filter.
8.
Align the exhaust vent shroud.
9.
Firmly press the exhaust vent shroud into position.
10. Close the door.