Cleaning the condenser
Always make sure that you unplug the tumble dryer from the mains before you start any maintenance.
Warning: Do not use Abrasive cleaners, sharp instruments, soap, household cleaner, detergent or flammable fluids. They may damage the tumble dryer and may cause a fire.
Clean the condenser when the condenser cleaning warning indicator illuminates.
Clean the condenser if the cleaning warning indicator has not illuminated after every 30 drying cycles or once a month.
Caution: Wait for the tumble dryer to cool down before cleaning the condenser.
1.
Unplug the tumble dryer from the mains power.
2. Locate the plinth cover.
3.
Using the plinth opening slot open the plinth cover.
4. Release the 2 cover locks which hold the condenser in place.
5. Pull the condenser out.
6.
Using a shower, clean the condenser. Then allow the condenser time to drain off.
7.
Replace the condenser.
8.
Lock back into place the 2 cover locks.
9.
Close the plinth cover.
10.
Plug the tumble dryer back into the mains power.