Selecting a drying cycle
Caution: Never open the door while a drying cycle is running. If you do, do not keep it open for a long period of time. Press Start/Pause to resume the drying cycle.
Note: if the clothing is not taken out of the tumble dryer after the drying cycle has ended, the 1 hour Anti Crease cycle will automatically start. This programme rotates the drum at regular intervals to help prevent the clothing creasing.
1.
Plug the tumble dryer into the mains power.
2.
Open the door.
3.
Load the clothing into the drum, ensuring they are loosely packed.
For more information, see the Preparing the clothing for the tumble dryer topic.
4.
Close the door.
5.
Turn the Programme Selection Knob to the desired programme.
The Start/Pause LED will flash during the programme selection,
6.
If required, press the desired Additional function button (e.g., Delay Start).
For more information, see the Additional functions topic.
7.
Press the Start/Pause button to start the drying cycle.
The Start/Pause LED will turn on.
8.
The Programme Progress Indicators will show the progress of the drying cycle.
For more information, see the Electronic Indicator Symbols/Programme Progress Indicators topic.
9.
At the end of the drying cycle the Start/Pause, Water Tank Level Indicator, Lint Filter Cleaning Indicator and Condenser Cleaning Indicator will illuminate.
10.
Turn the Programme Selection Knob to the Off position.
11.
Open the door.
12.
Carefully remove the clothing.
Caution: The temperature in the drum may still be hot.
13.
Clean the drum and lint filter.
For more information, see the Cleaning the lint filter topic.
14. Close the door.
15.
Empty the Water Tank.
For more information, see the emptying the Water Tank topic.
16. Unplug the tumble dryer from the mains power supply.