Selecting a drying cycle
Caution: Never open the door while a drying cycle is running. If you do, do not keep it open for a long period of time. Press Start/Pause to resume the drying cycle.
1. Plug the tumble dryer into the mains power.
2.
Open the door.
3.
Load the clothing into the drum, ensuring they are loosely packed.
For more information, see the Preparing the clothing for the tumble dryer topic.
4.
Close the door.
5.
Press the on/off button.
6.
Turn the programme selection knob to the desired programme.
For more information, see the Programme selection knob topic.
7. If required, press the desired additional function button.
For more information, see the Additional function buttons topic.
8.
Press the start/pause button to begin the drying cycle.
9.
The drying cycle progress icons will illuminate and the remaining time will be displayed on the control panel.
For more information, see the Electronic indicator symbols / indicators Topic.
10.
The tumble dryer will display End when the drying cycle is complete.
If the clothing is not removed within 1 minute the tumble dryer will automatically start the Anti-Crease cycle which will run for 30 minutes.
For more information, see the Setting the anti-crease function topic.
11.
Press the on/off button.
12.
Open the door and remove the clothing.
13. Clean the drum and lint filter.
For more information, see the Cleaning the lint filter topic.
14. Close the door.
15. Clean the base filter.
For more information, see the Cleaning the base filter topic.
16. Empty the water tank.
For more information, see the Emptying the water tank topic.
17. Unplug the tumble dryer from the mains power supply.