Selecting a drying cycle
Caution: Never open the door while a drying cycle is running. If you do, do not keep it open for a long period of time. Press Start/Pause to resume the drying cycle.
1. Plug the tumble dryer into the mains power.
2.
Open the door.
3.
Load the clothing into the drum, ensuring they are loosely packed.
For more information, see the Preparing the clothing for the tumble dryer topic.
4.
Close the door.
5.
Turn the programme selection knob to the desired programme.
For more information, see the Programme selection knob topic.
6. If required, press the desired additional function button.
For more information, see the Additional function buttons topic.
7.
Press the start/pause button to begin the drying cycle.
8.
The drying cycle progress icons will illuminate and the remaining time will be displayed on the control panel.
For more information, see the Electronic indicator symbols / indicators Topic.
9.
The start/pause, water tank level, lint cleaning and heat exchanger cleaning LEDs will illuminate on the tumble dryer when the drying cycle is complete.
If the clothing is not removed within 1 minute the tumble dryer will automatically start the Anti-Crease cycle which will run for 30 minutes.
For more information, see the Setting the anti-crease function topic.
10.
Turn the programme selection knob to Off
11.
Open the door and remove the clothing.
12. Unplug the tumble dryer from the mains power supply.
13. Clean the drum and lint filter.
For more information, see the Cleaning the lint filter topic.
14. Close the door.
15. Clean the heat exchanger.
For more information, see the Cleaning the heat exchanger topic.
16. Empty the water tank.
For more information, see the Emptying the water tank topic.