Turning the child lock on and off
To avoid programme flow from being affected if the additional function buttons are pressed or programme selection knob is turned when performing a drying cycle in your machine, a child lock is available.
CAUTION: The child lock is NOT automatically deactivated at the end of a drying programme or when the programme selection knob is set to off.
1. To activate the child lock, press both the Anti-crease and Signal buttons at the same time for 3 seconds.
CL will be displayed on the control panel for 2 seconds, along with an audible beep.
2.
To deactivate the child lock, wait until the drying programme has finished, then press both the Anti-crease and signal buttons at the same time for 3 seconds
CL will be displayed on the control panel for 2 seconds, along with an audible beep.