Connecting the Water discharge hose
1. Unplug the tumble dryer from the mains power.
2. Carefully pull the tumble dryer out of the installed position.
3. Locate the drain hose connection point on the rear of the tumble dryer.
4. Using your hand, carefully pull out the water hose.
5. Push one end of the drain hose into the drain hose connection point.
6. Connect the other end of the drain hose to a waste pipe or stand pipe.
Ensure the maximum height of the waste pipe or stand pipe is no higher than 80cm.
7. Ensure the drain hose is not kinked or tangled.
8. Push the tumble dryer back into position.
9. After the next drying cycle, check for any leaks.