Connecting the stand
1. Line up the screw holes on the foot with the holes on the corresponding side of theTV.
2. Hold the stand in place lining up the foot with the screw holes on the bottom of the TV.
3. Using a screw driver, screw in the two screws provided into the bottom of the foot.
4. Ensure that the foot is firmly in place.
5. Locate the two screw holes above where the foot is attached.
6. Screw in the two black screws that are provided.
7. Ensure that all screws are screwed in tightly.
8. Repeat these steps on the left side to complete the connecting of the feet.