Operating your vacuum cleaner
1. Push the flexible hose coupling into the hose socket, then turn clockwise until it locks into place.
2.
Push the flexible hose handle into the extension tube.
3.
Push the extension tube button and pull out the inner tube to extend the extension tube to the desired length.
4.
Push the extension tube into the desired accessory (E.g., floor head).
For more information, see the Getting to know the accessories topic.
5.
Alternatively push the flexible hose handle into the desired accessory (E.g., floor head).
For more information, see the Getting to know the accessories topic.
6.
Pull out the power cord until the yellow mark is visible, then plug it into the mains socket.
Caution: The YELLOW mark on the power cord indicates the recommended length of the power cord. Do not extend the power cord beyond the RED mark.
7.
If desired, adjust the suction power using the suction control slider.
8.
Press the on/off button to power on the vacuum cleaner.
9.
You can quickly reduce the suction power by pushing the air flow regulator on the hose handle. Push it up, suction power will reduce; push it down, suction power will increase.
10.
When you have finished, push the on/off button to power off the vacuum cleaner.
11.
Unplug the vacuum cleaner from the mains.
12.
Press the cord rewind button and guide the power cord with your hand while it is retracting.