Operating your vacuum cleaner
1. Push the flexible hose coupling into the hose socket, until it locks into place.
2.
Push the flexible hose handle into the extension tube.
3.
Slide the extension tube button down and pull the extension tube to the desired length.
4.
Push the desired accessory (E.g., floor head) onto the extension tube.
For more information, see the Getting to know the accessories topic.
5.
Alternatively push the flexible hose handle into the desired accessory (E.g., floor head).
For more information, see the Getting to know the accessories topic.
6.
Pull out the power cord until the yellow mark is visible, then plug it into the mains socket.
Caution: The YELLOW mark on the power cord indicates the recommended length of the power cord. Do not extend the power cord beyond the RED mark.
7. Plug your vacuum cleaner into the mains power.
8.
Press the on/off button to power on the vacuum cleaner.
9.
You can quickly reduce the suction power by pushing the suction release slider on the hose handle. Open it to reduce suction power; Close it and suction power will increase.
10.
When you have finished, push the on/off button to power off the vacuum cleaner.
11.
Unplug the vacuum cleaner from the mains.
12.
Press the cord rewind button and guide the power cord with your hand while it is retracting.