Removing hair and debris
Always disconnect the vacuum cleaner from the mains before carrying out any cleaning or maintenance.
To prevent a loss of suction, ensure any removable accessories/filters are assembled and aligned correctly.
1.
To remove hair from the brush roll bar, carefully use a pair of scissors. Ensure you do not cut the bristles.
For more information, see the Clean the brush roll bar topic.
2.
To remove hair or debris from an attached accessory, pull to remove the accessory away from the handle.
3.
Use a pair of long nose pliers, a thin long wire or a narrow screwdriver to remove the hair or debris.
4.
Push the accessory back onto the handle.