Cleaning the pump filter
The pump filter system lengthens the life of your pump, which is used to drain the dirty water. It prevents dirt entering the pump. Cleaning of your pump filter every 2-3 months is recommended.
The pump filter should be checked if the washer dryer does not empty or spin, or makes unusual noises during draining.
WARNING: Never remove the filter during a wash programme, always wait until the programme has finished and the laundry has been removed.
1.
Close the inlet water tap.
2. Place a towel or container in front of the filter cover to prevent any spillage from the remaining water in the washer dryer.
3. Open the pump cover.
4.
Turn the filter cover anti-clockwise.
5. Remove the filter cover.
6. Remove any debris from inside the pump filter housing.
7. Clean the filter with a brush, then flush the filter with clean water.
8.
Replace the filter cover, then turn the filter cover clockwise to lock it into place.
9. Close the pump cover.
10. Open the inlet water tap.