Cleaning the water inlet filter
On the tap part of your machine’s water inlet hose and at the ends of water inlet valves, there are filters to prevent entrance of the dirt and foreign materials in the water to the machine. If the machine is unable to receive sufficient water even though your water inlet tap is fully opened, filters should be cleaned.
1.
Close the water inlet tap.
2.
Unscrew and remove the water inlet hose.
3.
Remove the filters found on the water inlet valves by using a pincer or pliers and wash thoroughly with a brush.
4. Screw the water inlet hose back on the washing machine.
5. Unscrew and remove the water inlet hose on the water inlet tap.
6.
Clean the filters of the water inlet hose located on the tap side by removing manually together with the seal.
7.
Screw the water inlet hose back onto the water inlet tap.
8.
Open the water inlet tap.