Connecting the water inlet hose
Important: This washing machine MUST only be connected to a cold water supply.
1.
Locate the water inlet connection on the rear of the washing machine.
2.
Connect the right angled end of the water inlet hose to the inlet connection on the back of the machine and tighten the nut clockwise by hand.
Caution: Only tighten the nut by hand, never use tools when tightening the nut as you may damage it.
3.
Connect the straight end of the water inlet hose to the cold mains water supply valve by turning clockwise by hand.
Caution: Only tighten the nut by hand, never use tools when tightening the nut as you may damage it.
4.
When both ends of the water inlet hose are connected, open the water inlet tap and check for any water leaks.