Tumble Dryers BUSH TDNBX8HP 917 5187 Heat Pump
Help & Support for your Tumble Dryers BUSH TDNBX8HP 917 5187 Heat Pump
- General maintenance
Always make sure that you unplug the tumble dryer from the mains before you start any maintenance. Warning: Do not use Abrasive cleaners, sharp instruments, soap, household cleaner, detergent or…
- Using the My Cycle Programme
The My Cycle programme can used to define and save your most used drying programme.…
- Emptying the water tank
CAUTION: The water tank MUST in place and be emptied after each use. Never remove the water tank when the tumble dryer is in use.…
- Cleaning the lint filter
Always make sure that you unplug the tumble dryer from the mains before you start any maintenance. Warning: Do not use Abrasive cleaners, sharp instruments, soap, household cleaner, detergent or…
- Positioning the tumble dryer
Install the tumble dryer in a dry, dust free, well ventilated room.…
- Laundry care symbols
Most clothes will include ‘laundry care’ symbols on the label which can help you select the correct drying cycle. Always check the user manual for details of this, but the steps below will give you so…
- Cleaning the base filter
Always make sure that you unplug the tumble dryer from the mains before you start any maintenance. Warning: Do not use Abrasive cleaners, sharp instruments, soap, household cleaner, detergent or…
- Programme Selection Knob
My Cycle – Used to save your favourite programme.…
- Turning the child lock on and off
To avoid programme flow from being affected if the additional function buttons are pressed or programme selection knob is turned when performing a drying cycle in your machine, a child lock is availa…
- Setting the anti-crease function
At the end of the drying cycle “ End” will be displayed for 1 minute, then an anti-crease cycle will run for 30 minutes. You can select the anti-crease function, this will run for 120 minutes. N…