To see what each step looks like, just click each step and check out the picture. You can also use the arrow keys on your keyboard.

  • 1. Start button - Used to start the drying cycle.
    Note: The start button will not pause the drying cycle. To stop the drying process turn the Drying programme selector to the Off position.
  • 2. Heat selector button - Used for selecting the desired drying temperature.
    For more information, see the Heat selector button topic.
  • 3. Timer selector knob - Used for selecting the desired drying cycle.
    For more information, see the Timer selector knob topic.
  • 4.

    Door – Used to load clothing into the tumble dryer.

  • 5.

    Drum – Used to hold and rotate the clothing during the drying cycle.

  • 6.

    Lint filter – Used to prevent fibres which are released from clothing in the tumble dryer blocking the vent hose. The lint filter must be cleaned after each use.

    For more information, see the Cleaning the lint filter topic.

  • 7.

    Air intake shroud – Air is taken into the tumble dryer, then past a heating element. Regular cleaning of the filter is required.

    For more information, see the Cleaning the air intake shroud topic.

  • 8. Reset button - Used to reset the tumble dryer if it overheats.
    For more information, see the The tumble dryer has stopped working topic.
  • 9. Adjustable feet – Used to level the tumble dryer on a slightly uneven surface.
    For more information, see the Adjusting the feet topic.
  • 10.

    Exhaust vent – Expels air from inside the tumble dryer.

  • 11.

    Vent hose – Attaches to the air outlet to expel the air from inside the tumble dryer.

    For more information, see the Assembling the vent hose topic.