To see what each step looks like, just click each step and check out the picture. You can also use the arrow keys on your keyboard.

  • Always make sure that you unplug the tumble dryer from the mains before you start any maintenance.

    Warning: Do not use Abrasive cleaners, sharp instruments, soap, household cleaner, detergent or flammable fluids. They may damage the tumble dryer and may cause a fire.

    Clean the condenser when the condenser cleaning warning indicator illuminates.

    Clean the condenser if the cleaning warning indicator has not illuminated after every 30 drying cycles or once a month.

    Caution: Wait for the tumble dryer to cool down before cleaning the condenser.

  • 1.

    Unplug the tumble dryer from the mains power.

  • 2. Locate the plinth cover.
  • 3.

    Using the plinth opening slot open the plinth cover.

  • 4. Release the 2 cover locks which hold the condenser in place.
  • 5. Pull the condenser out.
  • 6.

    Using a shower, clean the condenser. Then allow the condenser time to drain off.

  • 7.

    Replace the condenser.

  • 8.

    Lock back into place the 2 cover locks.

  • 9.

    Close the plinth cover.

  • 10.

    Plug the tumble dryer back into the mains power.