To see what each step looks like, just click each step and check out the picture. You can also use the arrow keys on your keyboard.

  • 1. Push the flexible hose coupling into the hose socket, then turn clockwise until it locks into place.
  • 2.

    Push the flexible hose handle into the extension tube.

  • 3.

    Push the extension tube button and pull out the inner tube to extend the extension tube to the desired length.

  • 4.

    Push the extension tube into the desired accessory (E.g., floor head).

    For more information, see the Getting to know the accessories topic.

  • 5.

    Alternatively push the flexible hose handle into the desired accessory (E.g., floor head).

    For more information, see the Getting to know the accessories topic.

  • 6.

    Pull out the power cord until the yellow mark is visible, then plug it into the mains socket.

    Caution: The YELLOW mark on the power cord indicates the recommended length of the power cord. Do not extend the power cord beyond the RED mark.

  • 7.

    If desired, adjust the suction power using the suction control slider.

  • 8.

    Press the on/off button to power on the vacuum cleaner.

  • 9.

    You can quickly reduce the suction power by pushing the air flow regulator on the hose handle. Push it up, suction power will reduce; push it down, suction power will increase.

  • 10.

    When you have finished, push the on/off button to power off the vacuum cleaner.

  • 11.

    Unplug the vacuum cleaner from the mains.

  • 12.

    Press the cord rewind button and guide the power cord with your hand while it is retracting.