To see what each step looks like, just click each step and check out the picture. You can also use the arrow keys on your keyboard.

  • Always disconnect the vacuum cleaner from the mains before carrying out any cleaning or maintenance.

    To prevent a loss of suction, ensure any removable accessories/filters are assembled and aligned correctly.

  • 1.

    To check the floor head for blockages, press the release button, then pull the floor head away from the extension tube.

  • 2.

    Check for any blockages and remove using a pair of long nose pliers.

  • 3.

    Push the floor head onto the extension tube until you hear a click.

  • 4.

    To check the extension tube for blockages, press the release button, then pull the floor head away from the extension tube.

  • 5.

    Press the release button, then pull the extension tube away from the handheld unit.

  • 6.

    Check for any blockage and remove using a pair of long nose pliers or a long thin piece of wire.

  • 7.

    Push the extension tube onto the handheld unit until you hear a click.

  • 8.

    Push the floor head onto the extension tube until you hear a click.

  • 9.

    To check the pre-motor filter for blockages, remove the pre-motor filter and check for and remove any blockages.

    For more information, see the Clean the pre-motor filter topic.

  • 10.

    To check the post-motor filter for blockages, remove the post-motor filter and check for and remove any blockages.

    For more information, see the Clean the post-motor filter topic.