Removing hair and debris
To see what each step looks like, just click each step and check out the picture. You can also use the arrow keys on your keyboard.
Always disconnect the vacuum cleaner from the mains before carrying out any cleaning or maintenance.
To prevent a loss of suction, ensure any removable accessories/filters are assembled and aligned correctly.
- 1.
To remove hair from the floor head brush roll, carefully use a pair of scissors. Ensure you do not cut the bristles.
For more information, see the Clean the floor head brush roll topic.
- 2.
To remove hair or debris from an attached accessory, press the release button then pull to remove the accessory away from the handheld unit.
- 3.
Use a pair of long nose pliers, a thin long wire or a narrow screwdriver to remove the hair or debris.
- 4.
Push the accessory back onto the handheld unit until you hear a click.