Operating your vacuum cleaner
To see what each step looks like, just click each step and check out the picture. You can also use the arrow keys on your keyboard.
- 1. Push the flexible hose coupling into the hose socket, until it locks into place.
- 2.
Push the flexible hose handle into the extension tube.
- 3.
Slide the extension tube button down and pull the extension tube to the desired length.
- 4.
Push the desired accessory (E.g., floor head) onto the extension tube.
For more information, see the Getting to know the accessories topic.
- 5.
Alternatively push the flexible hose handle into the desired accessory (E.g., floor head).
For more information, see the Getting to know the accessories topic.
- 6.
Pull out the power cord until the yellow mark is visible, then plug it into the mains socket.
Caution: The YELLOW mark on the power cord indicates the recommended length of the power cord. Do not extend the power cord beyond the RED mark.
- 7. Plug your vacuum cleaner into the mains power.
- 8.
Press the on/off button to power on the vacuum cleaner.
- 9.
You can quickly reduce the suction power by pushing the suction release slider on the hose handle. Open it to reduce suction power; Close it and suction power will increase.
- 10.
When you have finished, push the on/off button to power off the vacuum cleaner.
- 11.
Unplug the vacuum cleaner from the mains.
- 12.
Press the cord rewind button and guide the power cord with your hand while it is retracting.