Clean the brush roll bar
To see what each step looks like, just click each step and check out the picture. You can also use the arrow keys on your keyboard.
Always disconnect the vacuum cleaner from the mains before carrying out any cleaning or maintenance.
To prevent a loss of suction, ensure any removable accessories/filters are assembled and aligned correctly.
- 1.
Unplug the vacuum cleaner from the mains.
- 2.
Push the cleaner release button from the upright storage position to the operating position.
- 3.
Turn the vacuum cleaner face down on the floor.
- 4.
Using a Philips screwdriver remove the 6 screws on the brush cover located on the floor head.
- 5.
Remove the brush cover.
- 6.
Check for any blockages or debris on the brush roll bar, removing any trapped hair, string or thread using a pair of scissors.
Ensure not to cut any bristles.
- 7.
Replace the brush cover onto the floor head, using the 6 screws and a Philips screwdriver.