To see what each step looks like, just click each step and check out the picture. You can also use the arrow keys on your keyboard.

  • Always disconnect the vacuum cleaner from the mains before carrying out any cleaning or maintenance.

    To prevent a loss of suction, ensure any removable accessories/filters are assembled and aligned correctly.

  • 1.

    Unplug the vacuum cleaner from the mains.

  • 2.

    Push the cleaner release button from the upright storage position to the operating position.

  • 3.

    Turn the vacuum cleaner face down on the floor.

  • 4.

    Using a Philips screwdriver remove the 6 screws on the brush cover located on the floor head.

  • 5.

    Remove the brush cover.

  • 6. Rotate the left end of the brush roll bar, then lift it out.
  • 7. Lift out the right end of the brush roll bar, remove the old belt from the brush roll shaft, then remove the brush roll bar.
  • 8. Remove the old belt from the motor shaft.
  • 9. Loop the new belt around the motor shaft.
  • 10. Loop the new belt around the left end of the brush roll bar shaft. Push the right end of the brush roll bar into position on the right side of the floor head.
  • 11. Align the left end of the brush roll bar with the slot on the left side of the floor head, then push into position.
  • 12.

    Replace the brush cover onto the floor head, using the 6 screws and a Philips screwdriver.