To see what each step looks like, just click each step and check out the picture. You can also use the arrow keys on your keyboard.

  • 1. Open the fridge door.
  • 2. Locate the water tank.
  • 3. Carefully pull the water tank out at a 45 degree angle.
  • 4. Disassemble the water tank parts. Firstly remove the water tank cap and metal support wire.
  • 5. Remove water tank cover. To do this unclip the water tank cover at the rear.
  • 6. Remove the water tank cover.
  • 7. Remove the seal ring from the bottom of the water tank. Wash the all parts with warm soapy water, then dry using a dry soft cloth.
  • 8. To remove and clean the water valve and dispenser. Insert a flat head screwdriver between the water valve and fridge door.
  • 9. Carefully lift the water valve edge using the flat head screwdriver.
  • 10. Remove the water valve. The water valve can be cleaned using warm soapy water, then dry using a dry soft cloth.
  • 11. Should the water valve become disassembled, it must be reassembled in the following manner.
  • 12. Insert the spring into the nozzle.
    Note: Ensure all the grooves are at the top of the water valve body and nozzle.
  • 13. Attach the dispenser body to the nozzle.
    Note: Ensure all the grooves are at the top of the water valve body and nozzle.
  • 14. Push the nozzle into the dispenser body and from the other end push the insert cap onto the end.

  • 15. The water valve is now fully assembled.
  • 16. Carefully push the water valve back into the dispenser body until it clicks into place.
    Note: Ensure the nozzle is pointing downwards and the groove on the water valve is aligned with the groove on the dispenser body.
  • 17. Replace the seal ring onto the bottom of the water tank.
    Ensure there are no wrinkles or creases.
  • 18. Replace the water tank cap and metal support wire and water tank cover.
  • 19. Insert the water tank by placing the seal ring into the water valve.
  • 20. Align the slots on the side of the water tank with the slots in the door and carefully push the water tank into position.
  • 21. Carefully push the water tank into position.
  • 22. Clean the water dispenser by dispensing warm soapy water through it, then dispense 6 cups of clean water through it to wash away the soapy water.