Fridge Freezers BUSH MSBSNFWTDSS 847/5761
Help & Support for your Fridge Freezers BUSH MSBSNFWTDSS 847/5761
- Getting to know the fridge freezer
Water Dispenser - Used to dispense chilled water from the water tank.…
- Positioning the fridge freezer
Ensure that the rear fan grills are not obstructed. Leave at least 100mm space from the back of the fridge freezer to the wall.…
- Adjusting the feet
The fridge freezer needs to be installed so it leans about 10mm to the rear ensuring that the doors always shut if not closed correctly.…
- Aligning the doors
If the doors are not aligned the height of the right door (Fridge door) can be adjusted.…
- Resting prior to operating
We advise that before turning on the fridge freezer for the first time to wait at least 4 hours to allow the cooling system gas to settle.…
- Connecting the power supply
Allow the fridge freezer at least for 4 hours to settle before connecting to the power supply.…
- Ambient Conditions
The fridge freezer performs well in temperatures between 10°c — 43°c .…
- Shelf location and efficiency
Do not add food to the fridge until the correct internal temperature has been reached.…
- Adjust the temperature settings
When switched on, the default temperature will be set to -18°C (Freezer) and 5°C (Fridge).…
- Positioning food
Always follow use by dates and suggested food storage times.…
- Filling the water tank
Fully open the fridge door to access the water tank .…
- Using the water dispenser
Do not use the water dispenser without a container or cup below. Ensure all parts of the water tank and dispenser and correctly fitted.…
- The control panel
Freezer temperature control button – used to control the temperature of the freezer compartment.…
- Activate/ De-activate key lock
The lock function will activate after 60 seconds of inactivity. The lock/ unlock icon will display the current state of the lock (e.g. lock).…
- Function mode selection
Function modes can be enabled to put your appliance into vacation mode and quickly freeze or quick cool products being stored.…