Tumble Dryers BUSH TD3CNBW 881/5761
Help & Support for your Tumble Dryers BUSH TD3CNBW 881/5761
- Cleaning the lint filter
CAUTION: The lint filter MUST in place and be cleaned after each use.…
- The tumble dryer has stopped working
The tumble dryer is equipped with an overheat safety device that switches off the tumble dryer in the event of overheating.…
- The tumble dryer does not operate
Check that the tumble dryer is plugged into the mains power supply and the plug is switched on.…
- The rooms steams up when the tumble dryer is running
Ensure the tumble dryer is installed in a well ventilated room.…
- Getting to know the tumble dryer
Start button - Used to start the drying cycle.…
- Cancel a drying cycle
Open the door .…
- The clothing is being damaged or torn
Clothing can get caught between the door seal and drum which will create friction when the tumble dryer starts. Ensure the clothing is placed properly inside the drum .…
- Preparing the clothing for the tumble dryer
Before drying ensure the clothing is suitable to dry in the tumble dryer. Always check the label on the clothing label.…
- Selecting a drying cycle
Ensure the vent hose is extended and routed outdoors via a window or to an outdoor outlet in the wall.…
- Electrical safety
Please read these instructions carefully. They contain important information which will help you get the best from your tumble dryer and ensure safe and correct installation and operation.…